HohmTech 18650 BatteriesBLV PeruHΩ DEPOT 18650



Capacity (mAh)/ Wh: 3005 / 10.81Continuous Discharge Rate: 16.8AMax Discharge Current: 22.5AEnergy Density (wt.): 221.06 Wh/kgEnergy Density (vol.)
HohmTech 18650 BatteriesBLV PeruHΩ DEPOT 18650



Capacity (mAh)/ Wh: 3005 / 10.81Continuous Discharge Rate: 16.8AMax Discharge Current: 22.5AEnergy Density (wt.): 221.06 Wh/kgEnergy Density (vol.)

HohmTech 18650 Batteries

S/. 44.00 PEN S/. 40.00 PEN

  HΩ DEPOT 18650 Capacity (mAh)/ Wh: 3005 / 10.81Continuous Discharge Rate: 16.8AMax Discharge Current: 22.5AEnergy Density (wt.): 221.06 Wh/kgEnergy Density (vol.): 653.5 Wh/lCycle Life Retention: 500 (75%)Chemistry Type: DSP Li-NMC SAFETY NOTICE & WARNING Hohm DEPOT is tailor-made to push where other batteries...

mAh/Amp: Hohm Depot 3005mAh 16.8A (18650)

Hohm Life 3015mAh 22.12A (18650)
Hohm Depot 3005mAh 16.8A (18650)
Compare

american expressmaestromastervisa
Vendor: Hohm
Type: Batteries
Availability: In Stock Pre order Out of stock
Description

 

HΩ DEPOT 18650


Capacity (mAh)/ Wh: 3005 / 10.81
Continuous Discharge Rate: 16.8A
Max Discharge Current: 22.5A
Energy Density (wt.): 221.06 Wh/kg
Energy Density (vol.): 653.5 Wh/l
Cycle Life Retention: 500 (75%)
Chemistry Type: DSP Li-NMC

HohmTech 18650 Batteries SAFETY NOTICE & WARNING

Hohm DEPOT is tailor-made to push where other batteries fall.  It focuses on maintaining everything one would expect of Hohm Tech cells while simultaneously reducing the cost per unit of Ah.  R&D started in early 2020, with prototype testing by late 2020 and throughout 2021.  With minor, mild, and unique formulation adjustments, Hohm DEPOT can confidently surpass other ≈3Ah (3000mAh) cells.  A highly-positive result in the cell honing comes improved cycle life (via UL test standard).  This occurred by simply switching from the QSP to DSP (Quad vs. Dual Stripping Process).

 

As for the nitty-gritty…these are rated at 3005mAh capacity, with a CDR of 16.8A, and 80oC | 3.2V cut-off limit (whichever occurs first) @ 22.5A. For DC motor and inverter-only applications, the DEPOT cell handles 28.4A for 5s on, 30s off. Note: 28.4A limitation is solely for DC motor and inverter applications only. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr1, TID2, PVDL3, CLR4, mΩR5, and Temperature (°C). Hohm DEPOT is built from the DSP NMC chemistry formulation, with manganese inert compound replaced with additional proprietary levels of cobalt & nickel as well as added custom bonding agents to achieve unprecedented U.D.O.S. results.  It is further enhanced with components from industry-leading manufacturers that give it the heartbeat of Hohm Tech.

 

Every Hohm Tech Int’l cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies.  This includes MSDS, CE, ROHS, UN38.3, IEC, PSE, Specifications, and Air/Sea Transport certifications.  We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.

 

To expound on safety:

 

• modified cathode tag consisting of higher purity aluminum is utilized to aid in lowering internal resistance
• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

 

* NOTICE: Hohm Tech Int’l does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.
** CAN BE CHARGED AT 3.6A. This is not a misprint. 3.6A as in THREE POINT SIX-amp charging is possible, tested, proven, and approved within all strict safety protocols set forth.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.

 

1 Density Loss Ratio
2 Thermal Image Distribution
Pulse Voltage Drop Limitation
Cycle Life Retention
Resistance Retentivity Pre|Post
6 Surge/Pulse is applicable to Dynamic EV Systems ONLY and rated @ ≤5 SEC ON / ≥30 SEC OFF

HΩ LIFE4 18650

 

Capacity (mAh)/ Wh: 3015 / 10.85
Continuous Discharge Rate: 22.1A
Max Discharge Current: 31.5A
Energy Density (wt.): 217.4 Wh/kg
Energy Density (vol.): 655.9 Wh/l
Cycle Life Retention: 500 (70%)
Chemistry Type: QSP Li-NMC

HohmTech 18650 Batteries SAFETY NOTICE & WARNING

Hohm LIFE4 is designed for users that wish to feed insanely power-hungry devices without having to swap batteries every other minute. These are rated at 3015mAh capacity, with a CDR of 22.1A, and 80oC | 3.2V cut-off limit (whichever occurs first) @ 31.5A. For EV and DC motor applications, the LIFE4 cell handles repeated 37.1A loads @ 5s on, 30s off (Pulse/Peak). All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr1, TID2, PVDL3, CLR4, mΩR5, and Temperature (°C). Hohm LIFE4 is built from the QSP NMC chemistry formulation, with manganese inert compound replaced with additional proprietary levels of cobalt & nickel as well as added custom bonding agents to achieve unprecedented capabilities. It is further enhanced with components from industry-leading manufacturers that give it the heartbeat of Hohm Tech.

 

Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies.  This includes MSDS, CE, ROHS, UN38.3, IEC, PSE, Specifications, and Air/Sea Transport certifications.  We do not cut corners. We deliver what we promise… chart-topping performance, capacity, consistency, and safety.

 

To expound on safety:

 

• modified cathode tag consisting of higher purity aluminum is utilized to aid in lowering internal resistance
• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

 

* CAN BE CHARGED AT 4.43A. This is not a misprint. 4.43A as in FOUR POINT FOUR THREE-amp charging is possible, tested, proven, and approved within all strict safety protocols set by YongDeli New Energy.
** TESTING BEYOND TEMPERATURE. Hohm Tech Int’l cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.
*** NOTICE: Hohm Tech Int’l does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving requirements set forth.

 

1 Density Loss Ratio
2 Thermal Image Distribution
Pulse Voltage Drop Limitation
Cycle Life Retention
Resistance Retentivity Pre|Post
6 Pulse & Peak is applicable to Dynamic EV Systems ONLY and rated @ ≤5 SEC ON / ≥30 SEC OFF

 

 

 

 

 

 

 

 

 

Additional Information
mAh/Amp

Hohm Life 3015mAh 22.12A (18650), Hohm Depot 3005mAh 16.8A (18650)